+281-296-3382

Rings & Accessories

Sort By:  
1" Sig Pos-Align Offset Ring Insert Eccentric Offset (626017)
Signature rings also accept Pos-Align Offset Inserts so you can virtually sight-in your gun without moving the scope adjustments. Lens systems perform at their optimum when all lenses are optically centered. By keeping the internal optics centered, you'll see through the scope all of the clarity, sharpness, and brightness that the optics designers intended for you to see. The offset inserts also correct for any mis-alignment caused by receiver holes drilled off center, or the bases or rings being slightly off of perfect center. For you extreme range shooters, the need for expensive tapered bases or shimming becomes a hassle and expense of the past.

- 1"
- Material: Steel
- 1 each
Add to Cart
$7.68
Signature 1" Rings (420501)
Signature rings are the most significant technological advancement in scope mounting history. Signature rings are for the shooter who demands the best performance from his equipment and is a practical thinker. The benefits of this revolutionary design are many consistent accuracy, tremendous gripping power, scratch-free and stress-free mounting and scope value preservation. By putting a synthetic pivoting insert within a steel outer ring, your scope-to-ring surface area contact becomes virtually 100%.

Burris rings and bases have long been favorites of custom gunmakers because of their strength, beauty, and fit. It's easy to recognize Burris' leadership role in scope mounting systems when you consider the myriad of innovative designs and manufacturing processes that result in rock-solid performance. Each ring is made from a solid piece of steel with the top and bottom half perfectly mated.

- Dovetail front
- Windage adjustable rear
- Signature
- 1" Rings
- Medium
- Black Matte
Add to Cart
$33.12
Signature 1" Zee Rings (420522)
Signature rings are the most significant technological advancement in scope mounting history. Signature rings are for the shooter who demands the best performance from his equipment and is a practical thinker. The benefits of this revolutionary design are many consistent accuracy, tremendous gripping power, scratch-free and stress-free mounting and scope value preservation. By putting a synthetic pivoting insert within a steel outer ring, your scope-to-ring surface area contact becomes virtually 100%.

Burris rings and bases have long been favorites of custom gun makers because of their strength, beauty, and fit. It's easy to recognize Burris' leadership role in scope mounting systems when you consider the myriad of innovative designs and manufacturing processes that result in rock-solid performance. Each ring is made from a solid piece of steel with the top and bottom half perfectly mated. Zee rings with no moving parts are the best fitting and most positive gripping Weaver-style ring made.

- Signature Zee Rings
- 1"
- Medium
- Nickel
Add to Cart
$37.86
Quick Release 1" Extension Rings (49983)
With Leupold Quick-Release rings you can mount a scope, zero it, remove it, reattach it, and remain nearly dead-on with your original point of impact. The key is precise machining of the patented lever mechanism. Turning the lever forward engages the base of the ring, pulling the ring down and forward, locking it into its "zero" position.

Specifications:

- Style: Quick Release
- Extended: Front
- Ring Diameter: 1"
- Height: Medium
- Material: Steel
- Finish: Gloss Black
Add to Cart
$28.80
Ruger #1 & 77/22 Extension Ring Mounts (52306)
Leupold has made these solid-steel machined rings as an alternative to ringmounts sold by firearms manufacturers and as a no-tap mounting method.

Specifications:

- Fits: uger #1, 77/22
- Ring Style: Ring Mounts
- Extended: Front
- Ring Diameter: 1"
- Height: Medium
- Material: Steel
- Finish: Matte Black
Add to Cart
$60.00
Standard 1" Extension Rings (49908)
Designed to withstand even the heaviest recoiling rifles, Leupold Standard Rings are constructed of machined steel. Stronger than aluminum, steel rings are perfect for locking your scope solidly into place. The front ring is dovetail style while the rear is windage adjustable. Leupold Standard Rings are ideal for use with Leupold Standard Bases.

Specifications:

- Ring Style: Standard
- Extended: Front
- Height: Low
- Tube Diameter: 1"
- Material: Steel
- Finish: Gloss Black
Add to Cart
$28.25
Standard 30mm Extension Rings (51034)
Designed to withstand even the heaviest recoiling rifles, Leupold Standard Rings are constructed of machined steel. Stronger than aluminum, steel rings are perfect for locking your scope solidly into place. The front ring is dovetail style while the rear is windage adjustable. Leupold Standard Rings are ideal for use with Leupold Standard Bases.

Specifications:

- Ring Style: Standard
- Height: Super High
- Extended: Front
- Tube Diameter: 30mm
- Material: Steel
- Finish: Matte Black
Add to Cart
$43.73
UTG Pro P.O.I Picatinny Rings (RWU012510)
Leappers UTG Pro 1"/2PCs Low Profile P.O.I Picatinny Rings

Features:

- Low Profile P.O.I (Precision Optics Interface) Rings Have a 23mm Center Height to Fit Optics with a 1" Tube, and up to a 45mm Outer Objective
- The Innovative P.O.I (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined for a Precise Inner Diameter Scope Interface to Achieve a Seamless Ring-to-Scope Interaction
b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
- 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws and Designed with a 22mm Ring Width
- Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
- Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize

Specifications:

- Rail Type: Picatinny
- Profile Level: Low
- Ring Diameter: 1"
- Ring Width: 22mm
- Maximum Scope Outer Diameter: 45mm
- Number of Screws Per Ring: 4
- Material: Aluminum/Steel
- Weight: 2.20 oz
- Color: Black
Add to Cart
$59.97
.22 Caliber Aluminum Rings (TS00708)
Tasco handsomely styled 100% aircraft aluminum alloy rings can be detached and removed with a coin. Our bases are precision fit and won
Add to Cart
$9.95
Non-Tactical Rings (TS00704)
Tasco's handsomely styled 100% aircraft aluminum alloy rings can be detached and removed easily, and our mounting screws are stronger than traditional weaver style rings.

Specifications:

- Tube Diameter: 30mm
- Height: High
- Material: Aluminum
- Style: Picatinny
- Extended: No
- Finish: Matte Black

Note: Mounting hardware included.
Add to Cart
$9.95
Ring Mounts (54350)
These steel rings lock right onto the receiver of your favorite rifle, so there is no need for tapping or drilling. CZ 22 rings fit 16mm grooved receivers.

Specifications:

- Fits: CZ 550
- Ring Type: Ring Mount
- Tube Diameter: 1"
- Height: Medium
- Material: Steel
- Finish: Matte Black
Add to Cart
$52.80
Rimfire Ring Mounts (49949)
These steel rings lock right onto the receiver of your favorite rifle, so there is no need for tapping or drilling. 22 Rimfire rings fit a 13mm grooved receiver.

Specifications:

- Ring Type: Ring Mount
- Rail: 13mm
- Tube Diameter: 1"
- Height: Low
- Material: Steel
- Finish: Gloss Black
Add to Cart
$40.16
UTG 1" 2 Piece Steel Picatinny Rings (RSW1104)
UTG 1"/2PCs Low Profile Steel Picatinny Rings, 16mm Wide

Features:

- Upper and Lower Ring Portions Precision Machined from One Solid Block of Steel to Strict Tolerances for Optimal Fit
- Heat Treated QPQ Nitride Matte Black Finish for Strength and Added Weather and Wear Resistance
- Progressively Machined for a Precise Inner Ring Diameter to Achieve Optimal Tube Alignment; Grooved Inner Surface Guarantees Tube Retention
- Radiused Edges and Corners to Prevent Snagging, Scratching, or Tearing of Other Gear and for Effortless Access to Scope Windage and Elevation Turrets
- Utilizes Locking Torx Screws and Square-shaped Integral Recoil Stop for a Secure Zero Hold
- 22.7mm Center Height and Fits 1" Tube Optics with up to a 45 mm Outer Objective Diameter

Includes:

- 2 Piece Ring Set
- Each Equipped with 4 Top Torx Screws
- Mounting Base Designed to Fit on MIL-STD-1913 Rail Platform
- T15 Torx Wrench for Simple and User Friendly Installation

Specifications:

- Material: Steel
- Pieces: 2
- Rail Type: Picatinny
- Profile Level: Low
- Ring Diameter: 1"
- Ring Width: 16 mm
- Max. Scope Outer Dia.: 45 mm
- Screws Per Ring: 4
Add to Cart
$49.97
UTG 30mm 2 Piece Steel Picatinny Rings (RSW3104)
UTG 30mm/2PCs Low Profile Steel Picatinny Rings, 16mm Wide

Features:

- Upper and Lower Ring Portions Precision Machined from One Solid Block of Steel to Strict Tolerances for Optimal Fit
- Heat Treated QPQ Nitride Matte Black Finish for Strength and Added Weather and Wear Resistance
- Progressively Machined for a Precise Inner Ring Diameter to Achieve Optimal Tube Alignment; Grooved Inner Surface Guarantees Tube Retention
- Radiused Edges and Corners to Prevent Snagging, Scratching, or Tearing of Other Gear and for Effortless Access to Scope Windage and Elevation Turrets
- Utilizes Locking Torx Screws and Square-shaped Integral Recoil Stop for a Secure Zero Hold
- 25mm Center Height and Fits 30mm Tube Optics with up to a 49 mm Outer Objective Diameter

Includes:

- 2 Piece Ring Set
- T15 Torx Wrench for Simple and User Friendly Installation
- Each Equipped with 4 Top Torx Screws
- Mounting Base Designed to Fit on MIL-STD-1913 Rail Platform

Specifications:

- Material: Steel
- Pieces: 2
- Profile Level: Low
- Ring Diameter: 30mm
- Ring Width: 16 mm
- Max. Scope Outer Dia.: 49 mm
- Screws Per Ring: 4
Add to Cart
$49.97
UTG 34mm 2 Piece Steel Picatinny Rings (RSW4154)
UTG 34mm/2PCs Med. Profile Steel Picatinny Rings, 16mm Wide

Features:

- Upper and Lower Ring Portions Precision Machined from One Solid Block of Steel to Strict Tolerances for Optimal Fit
- Heat Treated QPQ Nitride Matte Black Finish for Strength and Added Weather and Wear Resistance
- Progressively Machined for a Precise Inner Ring Diameter to Achieve Optimal Tube Alignment; Grooved Inner Surface Guarantees Tube Retention
- Radiused Edges and Corners to Prevent Snagging, Scratching, or Tearing of Other Gear and for Effortless Access to Scope Windage and Elevation Turrets
- Utilizes Locking Torx Screws and Square-shaped Integral Recoil Stop for a Secure Zero Hold
- 32mm Center Height and Fits 34mm Tube Optics with up to a 63 mm Outer Objective Diameter

Includes:

- 2 Piece Ring Set
- Each Equipped with 4 Top Torx Screws
- Mounting Base Designed to Fit on MIL-STD-1913 Rail Platform
- T15 Torx Wrench for Simple and User Friendly Installation

Specifications:

- Material: Steel
- Pieces: 2
- Rail Type: Picatinny
- Profile Level: Medium
- Ring Diameter: 34mm
- Ring Width: 16 mm
- Max. Scope Outer Dia.: 63 mm
- Screws Per Ring: 4
Add to Cart
$49.97
Quick Release Rings (AI12244)
Barska Optics 1 inch Quick release rings (AI12244)

1" High Weaver Style See Through Quick Release Rings by Barska

Ergonomic quick detach/lock lever fully adjustable to fit on most weaver/picatinny rails. Easy detach/lock of 1 scope, light, laser sight, etc.

Specifications:

- Height: 1.2 inch
- Diameter: 1"
- Overall: 1.95 inch
- Material: Aluminum
- Finish: Black Matte
- #Rings/Pkg: 2
- #Lock Nuts: 4
Add to Cart
$16.99
1" Zee Quick Detach Rings (420031)
Burris rings and bases have long been favorites of custom gunmakers because of their strength, beauty, and fit. It's easy to recognize Burris' leadership role in scope mounting systems when you consider the myriad of innovative designs and manufacturing processes that result in rock-solid performance. Each ring is made from a solid piece of steel with the top and bottom half perfectly mated. Zee rings with no moving parts are the best fitting and most positive gripping Weaver-style ring made.

- Zee Quick Detachable Rings
- 1"
- Low
- Matte Black
Add to Cart
$46.14
Rifleman Vertical Split Rings (55850)
Leupold Rifleman scope rings are precision-machined from aircraft-grade aluminum to provide the necessary strength and recoil resistance without adding excess weight to the rifle. The rings are equipped with Torx head screws.

Specifications:

- Ring Type: Rifleman
- Tube Diameter: 1"
- Height: Medium
- Material: Aluminum
- Finish: Matte Black
Add to Cart
$9.60
Rifleman .22 Rimfire See-Thru Detachable Ring Mount (57323)
Leupold mounts are every bit as rugged and dependable as the Leupold optics they're intended to secure. With a huge variety of mounting systems, for nearly every type of firearm under the sun, you're sure to find the perfect match for you firearm, and your style of shooting. Leupold Rifleman aluminum scope mounts are precision machined from aircraftgrade aluminum to provide the necessary strength and recoil resistance, while not adding excess weight to the rifle.

Features:

- 2-piece Mounting Rings
- Type: .22 Rimfire 3/8" Rings
- Style: See-thru

Specifications:

- Model: 3/8" Rimfire
- Finish: Matte Black
Add to Cart
$9.60
Rifleman .22 Rimfire Rings (56533)
Leupold Rifleman scope rings are precision-machined from aircraft-grade aluminum to provide the necessary strength and recoil resistance without adding excess weight to the rifle. The rings are equipped with Torx head screws.

Specifications:

- Ring Style: Rifleman Ring Mount
- Material: Aluminum
- Finish: Matte Black
Add to Cart
$9.60
Per Page      1 - 20 of 260